To help us improve our support, please provide your feedback below. Wireless network terms and concepts When you configure the wireless network printer, you must ensure that your wireless network printer is configured to match the settings of the existing wireless network. Each wireless channel is on a different frequency. The SSID is a byte or less value and is assigned to the access point. About the Author Matthew Burley has been a writer of online content since Launch an Internet browser, then type the IP address for your router. You will be guided by the on-screen instructions until you are able to use your Brother wireless network printer.
|Date Added:||27 July 2014|
|File Size:||66.48 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Go to the Manuals section. Hold down the “Go” button on the wirelesx side of the printer, then continue to hold the button as you use the power switch to turn the printer back on. Locate the IP address for the printer on the printer settings document. However, in many countries the number of channels available are restricted.
Check and record the current wireless network settings below. Uses 26 digits of hexadecimal data.
Very helpful Helpful Not helpful. This information can be found in your router’s documentation and should be similar to ” Connecting a new printer to your computer can create a variety of problems. This section provides some of the main terms and concepts of these settings, which may be helpful when you configure the wireless network printer.
Configure the wireless settings: The SSID is a byte or less value and is assigned to the access point. If not, press and hold the “Go” button for 20 seconds to enable the wireless interface.
Change the “Communication Mode” option to “Infrastructure,” then click the gray “Browse” button next to “Wireless Network Name” and select your wireless network from the list.
For further information, see Ethernet wireless network. The Brother printer supports the following encryption methods:. Before configuring the wireless settings: The computer must be on your network. If the list is blank, check that the access point has power and is brothr the SSID, and then see if the printer and the access point are within range for wireless communication.
If you encounter this failure, please go back to Step 4 and setup the wireless connection again. The Brother printer uses the WEP keys as the pre-determined key.
Authentication methods The Brother printer 2710w the following methods: Type “admin” into the Username field and “access” into the Password field, then click the “OK” button.
FAQs & Troubleshooting
On the last page of the printer settings document is a Node Type listing. Once the Wireless Setup Wizard screen appears, follow the steps from Step 7 below. Contact Us Product Registration Visit www.
Therefore care must be taken when configuring these options. The installation instructions are available in the download.
Downloads | HLW | United States | Brother
Shared key A secret pre-determined key is shared by all devices that will access the wireless network. Click “Network Configuration” at the top of the screen.
Please follow the steps below. This FAQ explains how to configure your Brother machine for a wireless network using the Wireless setup wizard and a network cable temporarily.
Wireless network terms and concepts When you configure the wireless network printer, you must ensure that your wireless network printer is configured to match the settings of the existing wireless network. Authentication and encryption Most wireless networks use some kind of security settings. About the Author Matthew Burley has been a writer of online content since