Even it’s not full of features theses card appear to work fine and are supported by an opensource Linux driver. Indicates the SCSI identifier of an adapter [] or []. The Video Mode setting can be either Color or Monochrome. Note – The screens shown in this appendix are examples. You might decide to alter these default values if there is a conflict between device settings or to optimize system performance. Changing this item will affect disk letter assignment s if more than one device is attached to an adapter.

Uploader: Shakacage
Date Added: 7 June 2012
File Size: 14.17 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 94384
Price: Free* [*Free Regsitration Required]

The View Array screen shown below allows you to view the current array configuration. Note – When activating two arrays typically after a motherboard replacement rusion status of the second array is shown as “degraded” according hosh the LSI BIOS as it waits to sync. The counts stop when they reach their maximum value. LSI Logic provides the device drivers for various operating environments. The default value is 2 seconds, with options between 1 and 10 seconds.

SATA devices are not supported in these servers at this time. Device value has range 0x00 – 0x1F, 0 – 31 decimal.

Devices such as tape drives and scanners require that a device driver specific to that peripheral be loaded. A proprietary management tool also exists, see below. Only one array can be active at a time hoxt physical adapter.


The RAID type of the array. Select the type of array to create, as shown below. We experienced several disks failure on MPT SAS controllers and mpt-status always reported the failure and status changes.

Chapter 4. Message-based devices

When a RAID 1 volume is deleted, the data is preserved on the primary disk. The metadata stored on the disk drives contains sufficient information to restore and reactivate the RAID volumes in case the NVRAM is lost for example, when the motherboard is replaced. You may decide to change these default values if there is a conflict between device settings or if you need to optimize system performance.

Indicates global properties that are not associated with a specific adapter or device. The Configuration Utility will pause while the hotspare is being removed. Function has range 0x00 – 0x7, 0 – 7 decimal. Boot Drive Only provides removable-media support for a removable hard disk drive if it is first in the scan order. Data on disk is not synchronized with the rest of the array.


The BIOS will not hots the adapter when loaded. Even it’s not full of features theses card appear to work fine and are supported by an opensource Linux driver. This item can be used to ignore a device and to decrease boot time by disabling the inquiry of unused SCSI identifiers.


When part of an array, this option shows the size used for the array. The scan order for this device.

Hosting sponsored by http: Data on all other disks will be lost. The type of array being created: Press Insert or Delete to add or remove an adapter to or from the boot order. Download in other formats: When the system is powered on, the RAID volumes are automatically activated and resynchronization is automatically performed.

The PHY link status. It will log a ligne to syslog when something failed dcsi will send you a mail. The BIOS is either currently controlling the adapter or will attempt to control the adapter upon reload. CHS Mapping includes two settings:.

The Manage Array screen shown below is used to manage the current array.